• Groundable Housing and Hardware
  All components of ESD tape dispenser can be
  grounded with ground cord (or through work
  surface*) to be used in ESD Protected Area.
  
• Stainless Steel Construction
  Minimizes foreign objects debris, corrosion, and
  other contamination when used in clean or
  sensitive areas. Simplifies cleaning.
• Two Separate Spools Turn Independently
  Holds one 50mm wide roll of tape or two rolls
  of tape that are 25mm or less widths
  depending on needs.
  
• Heavy Weighted Design
  Extra weight allows for one-handed use;
  dispenser will not slide on most surfaces.
  
• Grounding Jack
  For operator personnel grounding with wrist
  strap or other grounding requirements
  
• Made In America

*Best practice is grounding via supplied ground cord. Attach cord to snap on chassis and to common point ground. If grounded via placing on a grounded ESD worksurface, resistance to ground (RTG) should be periodically tested <1 x 10E9 ohms. Click HERE for compatible ESD worksurfaces.

“Tools intended for use within the EPA [ESD protected area] shall, as far as is practicable, be so constructed that they do not generate or hold an electrostatic charge ….
All tools and machinery, for example electrical, mechanical or pneumatic, shall be so constructed that any non insulating part of the tool or machine which may touch an ESDS [ESD sensitive items] shall be at EPA ground potential.”
[EN 61340-5-1 clause 5.2.10 Tools, machinery, dispensers and test equipment]

If you would rather not receive these emails: please Click Here

If you are having trouble with the unsubscribe feature, e-mail CharleswaterNews@StaticExperts.com